|
Series 700™ BY EXPI-DOOR ®
THREE-YEAR EXTENDED WARRANTY
The Series 700™ is covered by a three-year extended warranty guaranteeing the opening to be free of defects in materials and workmanship (certain hardware components have longer warranties).
STANDARD KEY FEATURES
The Series 700™ is comprised of the highest quality components in conjunction with a proprietary anchoring system. Our standard components and features are the competition's upgrades. Compare the following:
Doors
18 gauge galvanized (A60), polystyrene insulated core, interlocking seam. Doors meet commercial Steel Door Institute (SDI) standards.
Frames
Welded frame.16 gauge galvanized (A60), 5 3/4" standard frame profile, interlocking corner connection (then welded). Frames meet commercial Steel Door Institute (SDI) standards.
Locks
EXPI-DOOR® Grade 1 commercial lever lock. Meets ANSI A156.2 series 4000, grade 1 requirements - 800,000 cycle test. Five-year warranty. Thru bolted for added strength. Free wheeling vandal resistant lever.
Subjambs
Proprietary offset subjamb/jamb anchor system - tested to 1,000,000 cycles.16 gauge galvanized (A40 minimum) subjamb. Polyethylene block anchors stiffen jambs and allow for offset design. Self trimming, no jamb trim required.
Paint Finish
All doors and frame have a baked-on beige primer coat meeting ANSI A250.1 standards. Paint test for salt spray, humidity, and adhesion.
Hinges
Ball bearing silver powder coat hinges with security non-removable pins.
Other
Full 5 3/4" aluminum threshold, dual finger TPE sweep, and urethane foam weatherseal for kerfless type application. All components meet commercial standards and ADA requirements. Doors are individually packaged with a wood skid base, corrugated box, and internal foam-in-place protective blocks.
|
OPTIONS
Schlage Grade 2 Lever Lock
Schlage AL53PD Grade 2 Entrance lock. Thru bolted and heavy duty compression springs. Three-year warranty.
Schlage Grade 1 Lever Lock
Schlage D53PD Grade 1 Entrance lock. Vandal-resistant free wheeling levers. Independent heavy duty spring cages for lever support. Thru bolted for positive interlock to door. Tested to 3,000,000 cycles. Seven-year warranty.
Schlage Mortise Lever Lock
Schlage heavy duty grade 1 mortise lever lockset with escutcheon plate. 3/4" latch throw and 1" deadbolt throw. Five-year warranty.
Von Duprin/Monarch Exit Devices
Various heavy duty grade 1 rim exit devices from Von Duprin (Series 22 and 99) and Monarch (18 Series). Various finishes and trim options. Ten-year warranties.
LCN Auto Closers
Heavy duty grade 1 surface applied closer. Backcheck, sweep and latch speed adjustment valves. LCN Series 1371 and 4041. Twenty-five-year warranty.
Latch Guard
Steel latch guard with chrome finish. Prevents tampering with the latch on lever locks.
|
Series 700™ Tech Specs (PDF)
Series 700™ Brochure (PDF)
|
|
